12 November 2013

Method for locally controlling tools attached to CNC machines

With our ToolControllers there is no need to transport high amp, high frequency pulses to your tools.
You just add power and low level signal wires.

29 October 2013

PCB milling with Cartesio

The guys over at prototype.asia have turned a CartesioM 0.8 into a pcb milling station.
With some amazing results.

Read all about it on their Blog

05 September 2013

Cartesio at 3Dprintshow London and Paris

Cartesio will be at the
2013 3D printshow
in London and Paris

Will you also be there ?
We hope we will meet you there.

20 August 2013

Cartesio V0.9

It`s almost ready.
The new CartesioM and CartesioW.

 Read on after the break

14 August 2013

Extruder with 1.3mm nozzle

I made an extruder with a 1.3mm nozzle for 1,75mm filament.
Now that is a big hole !
This one is for quick and thick infill.

Read on after the break

27 July 2013

First tests with high temp extruder

I did some testing with hp_'s ceramic hotend
It came with a 24V/30W heater cartridge.

Read on after the break.

24 July 2013

A visit to the man who prints houses

After meeting Mr. Enrico Dini about a year ago at the day of architecture in the Netherlands, I now had the rare opportunity to visit his Italian based 3D printing Valhalla.

 read on after the break.